Tools from grinding natural powders and synthetic diamonds for cutting of different materials
Diamond grinding wheels
Diamond grinding wheels are widely used in different areas of industry. Our company makes wheels with next types:
• Grinding wheels on metal bond 1À1 R with diameter from 100mm to 500mm. Cutting of non-metal materials (glass, ceramics, marble, concrete, granite etc.) with obligatory use of coolant (SOG).
• Diamond cutting-off wheels on resin bond 1À1 R. Cutting of carboloy of brands of ÂÊ6÷ ÂÊ15, ferrits, magnetic materials with hardness to 65HRCý, glass, and semiprecious stone with obligatory use of coolant (SOG).
• Diamond wheels with type of «TURBO» by diameter from 105mm to 350mm. Cutting of materials, used for building from natural stone, including without cooling with the use of hand electro-tool such as «Bosh», «Hilti», «Bulgarian» etc.
• Wheels segment 1À1 RSS by diameter from 105mm to 2000mm. Cutting of natural and artificial stone and similarly materials which are used during building construction using coolant (SOG). Such materials: marble, concrete, granite, brick, ceramics, limestone etc.
• Diamond wheels on galvanic bond. Cutting of non-metal materials: glass, glass-plastic, ceramics, fiberglass, graphite.
Diamond grinding wheels on metal bond 1A1RDiamond wheel on metal bond 14A1R (without body frame, with flanges)Diamond grinding wheels with segments 1A1RSS/C2Diamond wheels 1A1RSSDiamond grinding wheels with profile diamond layer 1A1R (Buran)Diamond grinding wheels on resin bond 1A1RSegments diamondDiamond stick on metal bond ÀÏÑ-2Ñ
|
Powders from diamonds and cubic boron nitride
Sharpening of belt saws by elbor roller
